Film Carrier 120
User Guide
Film Carrier 120 line drawing
Step 1
Open the magnetic hinged plate of your Film Carrier 120 by lifting up on the machined brass lever. Then insert your desired 120 mask (6x4.5, 6x6, 6x7, or 6x9) with the Beveled Side facing up and towards the hinge mechanism as shown above.
Step 3
Engage the advance wheel to finely adjustment spacing and placement of frame 01 on your film, and then close the magnetic hinge mechanism. Capture your scan.
Step 2
You’re now ready to insert your film and begin your scanning process! Insert your film emulsion side down first ensuring that the 120 hinge mechanism is in the upright position.
Step 4
After your first scan is captured, use the machined brass lever to raise the 120 hinge mechanism, and now turn the advance wheel to move to your next frame. Close the mask, capture the scan, and repeat previous steps until roll is completed.